|
Author |
Title |
| Bachar A |
Preparedness for Handling
a Mass Casualty Event |
| Berndtsson G |
Peak Inhalation Air
Flow and Minute Volumes Measured in a Bicycle Ergometer Test |
| |
The Consequences of
High Inhalation AIR Flow A Follow up on Peak Inhalation Air Flow and
Minute Volumes Measured in a Bicycle Ergometer Test |
| Bloudyan M, Plate
N, Batyrev V, Sorokin JG |
Respiratory Self-Escape
Devices: Imperative Need for Establishing a New Category of Respiratory
Protective Equipment |
| Cai S, Huo R,
Wang J |
Analysis of C.W.P
Complicated with Nosocomial Pulmonary Infections |
| Colton CE and
Weber RA |
Respirator Filter
Collection Efficiency and US Respirator Recommendations for Biological
Aerosols: A Review |
| Drews W |
Respiratory Breathing
Devices within ISO/TC 94/SC 15-A New Approach |
| Ekman LA |
A Practical Method for
Interpreting Breathing Curves in the Selection of Negative Pressure
Respirators |
| Gardner PD,
Caretti DM, Coyne KM |
Workplace Breathing
Rates: Defining Anticipated Values and Ranges for Respirator
Certification Testing |
| Gavriely N |
Mass Balance
Mathematical Model of Gas Exchange with CBRN Protection Devices |
| |
Criteria for Use of
Passive Respiratory Protection Devices by the General Public |
| van der Gijp S,
van Gulijk C, Gaasbeek R |
Establishing Air Flow
Patterns inside Respiratory Protection Devices |
| and Steenweg L |
Respirator Performance
During Military Field Trials |
| Harrison B, Liang
S |
Gas Mask Protection
Factor Measurements and Limitations |
| Heus R, Willems J |
Evaluation of The
Respicon-1 on Physical Performance |
| Holmer I, Kuklane
K, Gao C |
Peak Inspiratory Flow
Rates in Respirators during Graded Treadmill Exercise |
| Honda T, Kuriyama
S, Yuasa H, Kimura K, Emi H, Nozaki K, Tanaka S |
Performance of
Breath-Synchronized PAPR (2) |
| Howie R |
Performance Requirements
for a Light-Weight Filter Self-Rescue Device |
| |
Historical Data on
Breathing Rates |
| |
Assessment of the
Validity of QnFT in Selecting RPE |
| Ikawa S, Koyama H |
Development of PAO
(poly-alpha-olefin) Particle Generator |
| Ishimura S |
Measures against PCDDs
in Waste Incineration Facilities for Repair Works |
| Janssen LL,
Luinenburg MD, Mullins HE, Nelson TJ |
Evaluation of a Proposed
Method to Measure Penetration of Submicrometer Aerosols Through N95
Filters |
| Johnson AT |
How is Respirator
Comfort Affected by Individual Respiratory Resistance? |
| |
Why Physiological
Studies Are Important |
| Johnson J |
Respirator
Classification, A Subject That Requires Class Definitions and Oversight |
| Kim H, Kim K, Lee
J, Lee F, Kim DW |
Development of The New 3D
Test Panel for Half-Mask Respirators by 3D Shape Analysis for Korean
Faces |
| Kovac JG |
Standards Development
Efforts for Powered Air Purifying Respirators and Closed-Circuit
Breathing Apparatus Used to Protect Emergency Responders against
Chemical, Biological, Radiological and Nuclear Agents |
| Kravitz J |
The Storm Decline
Accident : An Investigation of The Use and Performance of Self-Contained
Breathing Apparatus |
| Kudo M |
Preventive Measures for
Workers of Incineration Plants from Exposure to Dioxin |
| Kurano N, Inai M,
Yamada H |
Types of Gas Respirators
Most Widely Used in Japan |
| Kuriyama S, Sato
A, Honda T, Nozaki K, Kimura K |
Performance of
Breath-Synchronized PAPR (1) |
| Lavanchy A |
Prediction of Filter
Performances against Organic Vapours: Statistical Analysis of
Breakthrough Times as a Basis for a Simple Prediction Model |
| Makowski K,
Majchrzycka K |
Assessment of Ergonomic
Aspects of Respiratory Protective Devices |
| Matsumura Y |
Respiratory Protection
of Workers and Citizens in Japan |
| Metzler RW |
CBRN Respirator
Standards Development in the United States |
| Miller T, Krasner
E, Alon U |
Civilian Protective
System - CAPS 2000 |
| Myojo T, Kanno S,
Takano T, Matsunobu K, Shono K |
An End-of-Service-Life
Indicator for Small Gas Cartridges Using Window of Detecting Reagent |
| , Sugimoto
M |
Comparative Study of
Respirator Fit-Testing Instruments Using Ambient Aerosols |
| Nakata Y, Kurano
N, Inai M |
Gas Desorption from
Chemical Cartridges |
| Newcomb W |
A Summary of OSHAs
Assigned Protection Factor Proposal |
| |
Total Inward Leakage of
Respirators and Other Personal Protective Equipment |
| Pietrowski P |
Protection Properties
of Electret Materials during Liquid Aerosol Filtration |
| Rajan R |
Workplace Performance
Assessment of Activated Charcoal Filters |
| |
An Innovative Approach
for Respiratory Exposure Hazard Control |
| |
Human Factors and
Respiratory Protective Devices in the Workplace |
| Richardson GS |
Further Advances in
the Development of a Personalised Respirator Face Seal |
| , Winskill J (Maj), McLeod A (Maj) |
The Development of
Instrumentation and Analysis Tools to Assess Respirator Performance in
the Field |
| Rowbotham A |
Respiratory Protection
for Military Aircrew |
| Sugita N, Yokochi
A |
PAO Aerosol as
Replacement for DOP |
| Suzuki K, Ogawa
A, Matsumura Y |
Influencing Factors of
Carbon Dioxide Concentration Increase of Filtering Respirators |
| Takei T |
Response and Preparedness
against Terrorism Attacks by Fire Fighters in Japan |
| Yamasato Y |
The Facts of "TOKYO
SUBWAY SARIN ATTACK CASE |
| Zhuang Z, Guan J,
Hsiao H, Bradtmiller B |
Evaluating the
Representativeness of the LANL Respirator Fit Test Panels for the
Current U.S. Civilian Workers |
| , Bradtmiller
B, Odenkrantz J, Schaffer R |
New Respirator Fit Test
Panels Representing the 2003 U.S. Civilian Workforce |