| Author/presenter |
Title |
|
Seaton, A. |
PLENARY LECTURE:
The Lung and the World Outside |
|
Metzler, R. |
KEYNOTE ADDRESS:
Personal Protective Equipment: Lessons Learned from Terrorist
Attacks |
| |
|
Aitken,
R.J.
Apsley, A.
—
Bagley, M.J.
Brown, R.C.
Hemingway, M.A.
Rajan, R. |
Capacity of Activated Carbon Filters: Theory and Experiment |
| Berndtsson. G. |
Inward Leakage Testing of Protective Suits |
| Berndtsson. G. |
The Role of
Peak Inhalation Air Flow in the Testing of Air Purifying Respirators |
| Bien, C.-T. |
The Development of Respirator Protection Factors in the United
States |
| Bowie, D. |
Respirators from an Asbestos Stripper's Viewpoint |
| Bryson, N. |
Breathing in Comfort and Safety |
| Calder,
S. |
The Introduction of Quantitative Respirator Fit Testing at the UKAEA
Dounreay Site |
Capon, A.
Savarin, M. |
How Leak-tight are New Respirators? |
| Caretti, D. M. |
Evaluation of Personal Cooling Technologies to Alleviate Mask
Thermal Discomfort |
Clayton,
M. P.
Rajan, B. |
RPE Fit Testing Using a Controlled Negative Pressure Device |
Crutchfield,
C. D.
Kautz, D. W.
Peate, W. F. |
A Faster, More Rigorous Protocol for Fit Testing Respirators |
Dawe,
R.S.
Ferguson, J.
Howie, R. |
Use of an Ambulatory Powered Respirator for Airborne Peanut Allergy |
| Delany, T. |
Respiratory Protection from a Management Perspective |
| Dennis. M. R. |
Modification of the Respirator Hood Interface to Reduce the
Protection Factor Requirement of the Face-seal |
Boord, L.
Dower,
J. |
NIOSH CBRN respiratory Protection Standards Update |
| Drews, W. |
PPE Breathing Devices within ISO Technical Committee TC 94 |
Enjoji,
T.
Yamada, H. |
An Evaluation of Filtering Efficiency for Reusable-Particulate
Respirators Simulating Actual Conditions |
| Fielding, R. M. |
Regenerative Filtration – the New Defence against Chemical and
Biological Weapons |
Forrest, J.
Graves, N. |
"Standards for the 21st Century Worker? Don't Hold your Breath." |
| Gardner, P. D. |
Development of an End-of-Service-Life Indicator for NBC Mask Filters |
Campbell, L.
Davis, J.
Hanzelka,
J. A.
Lins, R. |
Use of the SMARTMAN Test Apparatus in Testing Respiratory Protection |
| Harris,
S. J. |
Breathing Air System Design for the 21st Century |
| Hendrix,
J. M. H. H. |
How to Deal with RPE within a Global Petrochemical Industry |
| Hindmarsh, C. J. |
Novel Polymeric Barrier Materials for Respiratory Protection |
| Hindmarsh, C. J. |
Carbon Fibres for Combined
Particulate and Vapour Filters |
Hori,
H.
Ishidao, T.
Ishimatsu, S. |
Thermal Regeneration of a Respirator Cartridge for Organic Vapors |
| Howie, R. |
Respirable Fibre Release from Gas Masks |
| Howie, R. |
Relevance of Simulated WPF Studies |
Kievit,
O.
Steenweg, L.
Tuinman, I.
van der Gijp, S. |
Bio-aerosol Filtration using Electrostatic Media |
| Kranenburg, S. |
Wear Time and Peak Airflow Monitoring in a Lead Smelter |
| Kravitz, J. |
The Use of Self-Contained Breathing Apparatus during a Prolonged
Mine Disaster Response and Safeguards Required to Protect Rescue
Team Members from Biological Hazards |
| Kravitz, J. |
Non-Destructive Testing of Self-Contained Self-Rescuers Used in the
United States and the Program to Develop a Universal Breathing and
Metabolic Simulator |
McCurdy,
G.
Vijayakumar, R. |
Protection Factor and Filter Efficiency in Protective Face Masks |
| Makowski, K. |
The
Effect of Selected Aerosols on the Electrostatic Filtering Materials
for Respiratory Protective Devices |
Matsumura,
Y.
Ogawa, A.
Suzuki, K. |
Test Methods of Gas Masks and Particulate Respirators in Compliance
with the Japanese Standards |
| Metzler, R. |
Establishment of the NIOSH National Personal Protective Technology
Laboratory |
Berryann, R.
Metzler,
R.
Zhuang, Z. |
Setting the Respirator Research Agenda |
Matsumura, Y.
Myojo,
T.
Ogawa, A.
Sugimoto, Y.
Suzuki, K. |
New Standard for Dust Respirators in Japan |
| Pietrowski, P. |
Organic Gas Filter Performance Against Single and Binary Vapor
Mixtures |
| Richardson, G.
S. |
A Dual-Seal Respirator Concept for Increased Respiratory Protection |
Hindmarsh, C. J.
Pears, L. A.
Richardson,
G. S. |
3D Scanning Applications Relevant to Respirator Development |
| Rowbotham, A. |
Designing the Next Generation Military Respirator |
Gray, B.
Roberts, W.
Scanlan, S. |
Measurement of Operational Fit Factors for Soldiers Wearing the S10
Respirator |
| Steenweg, L. |
Evaluation of the FM12 Mask with Respect to the Protection Factors |
Steenweg, L.
Tuinman, I.
van Bokhoven, J. |
Simultaneous
Determination of Face Seal Leakage with Gas and
Particles |
Albers, T.
Baak, P.
van der Gijp, S. |
Protection by Positive Pressure |
| Weber, R. |
Environmental Issues and Possible Effects on Cartridges/Filters used
for CBRN Agent |
Kodera, K.
Kurano, N.
Mori, M.
Yamada,
H. |
Protective Performance of Respirators against Dioxin Generated in a
Waste Incineration Plant |
Kimura, K.
Yuasa,
H. |
The Performance of the Newly Developed Electrostatic Filter |
| Zhuang, Z. |
Correlation
between Quantitative Fit Factors and Protection Factors Measured
under Actual Workplace Environments at a Steel Foundry |
Guan, J.
Hsiao, H.
Zhuang,
Z. |
Recapturing the Sizing Issues of Respirator Fit-test Panels for
Emergency Response |
Berryann, R.
Zhuang, Z |
Recent NIOSH Research on Fit-test |
Hauthal, W.
Köser, H.
Ziegler,
M.G. |
Status Report 2002 of End-of-Service-Life Indicator for Gas Mask
Filter: Concepts, Commercial Products and Recent Development Work |